Adattatore ORKLI

The IRSAP NOW System is the innovative app-manageable heating control system, with which you can control the operation of the boiler or heat pump and adjust the room-by-room temperature whenever you want, following your lifestyle and needs. The Connection Unit and the App are the essential elements of the NOW System, to which are added the Smart Valves, the Smart Thermostat, the Starter and the Connection Unit in Repeater mode. (homepage link)

To check the compatibility of the IRSAP NOW system with your system, you can use the configurator. (link) In general, the IRSAP NOW System is compatible with all boilers and heat pumps, all thermostats and most thermostatic valves on the market.

The IRSAP NOW system allows you to optimize consumption thanks to the temperature management specific to each individual environment at home, thus avoiding waste. From a study carried out by the University of Bergamo, savings can be up to 42% if the IRSAP NOW system is installed in a radiator system, where the zones and time slots are not managed. In addition, through the dedicated IRSAP NOW App, you will receive indications and advice on how to save money, both through a usage indicator (savings sheet--> image), and with specific notifications (e.g. open window notification).

Yes, the NOW System can be included in the Ecobonus 65% and Superbonus 110% deductions, but not as a single element (or driving) efficiency. ATTENTION: if you intend to buy the NOW System and take advantage of the deductions, we remind you that the purchase must be made by "speaking transfer", not online. For this, you can contact one of our authorized resellers (link). According to Art. 11 of the Energy Efficiency Decree the characteristics that a system must possess in order to access the home automation bonus are as follows: "In the case of installation of building-automation systems, installed in housing units jointly or independently of the replacement of winter air conditioning systems, the asseveration, or suitable documentation produced by the equipment supplier, specifies that the aforementioned technology adheres at least to class B of en 15232 and allows the automatic personalized management of heating systems or production of domestic hot water or summer air conditioning in a manner suitable for : a) show through multimedia channels energy consumption through the periodic provision of data. The measurement of consumption can also take place indirectly with the possibility of using the other measurement systems installed in the plant as long as they are working; (b) show the current operating conditions and the control temperature of the installations; c) allow the weekly switching on, shutdown and programming of the systems remotely."

The devices of the NOW System communicate with each other wirelessly, via radio frequency. The devices that need to connect to the power outlet are the Connection Unit/Repeater and the Starter. Smart Valves and Smart Thermostats run on batteries instead. In addition, the Connection Unit must also be connected to the home router via Ethernet cable (included in the package). Additional cable connections may be made in cases where it is necessary to connect the Smart Thermostat and/or Starter to the heat generator.

Yes, the System can be easily shared across multiple users through the app. You can find more details in the "Multiuser Management" section in the app.

Within the NOW System, a maximum of i: 1 Connection Unit 25 Smart Valve 15 Smart Thermostat 3 Starter 5 Repeater

You can only buy some devices, depending on your heating system: to get started, you can try our Kits (link shops). If you want to get maximum efficiency and control over your system, we recommend that you install all the necessary devices; to find out which ones, use our configurator. (link)

The IRSAP NOW system and its devices are designed to be installed in DIY mode. The IRSAP NOW app will give you precise indications both for the DIY installation of the System and for its use. In addition, downloadable PDF files and video tutorials are available on the IRSAP website, which describe the procedures for installing all devices (links).

In the event of an Internet line outage, IRSAP NOW devices will continue to work following the latest saved configurations. In case you need to make urgent changes, you can make them manually on individual devices. After you reset your Internet connection, you can re-manage the IRSAP NOW system from your app without having to reset configurations.

Unfortunately, the previous version of the IRSAP NOW system is not compatible with this updated one. If you are in possession of the old NOW System and would like to purchase the devices of the new version, please contact us (link).

To activate IRSAP NOW you can rely on Amazon Alexa, Google Smart Assistant or manage it through IFTTT.